Leo 40GTX Atrium Lift With 129ft Working Height

The Leo 25T Plus atrium lift has a minimum width of only 5.2ft, max outreach of 54.7ft & a max working height of 129ft giving unrivaled performance capabilities when combining indoor & outdoor use compared to other machines in this height range.

Unrivaled Control

The non marking track drive system protects flooring when used indoors & allows for precise maneuvering so the platform can be easily setup to give access to hard to reach areas.

Safe Positioning In Tight Areas

The multi-level, multi-position stabilizer system allows the machine to be set up on slopes, uneven terrain, stairways and in confined areas giving access where the height difference of the terrain is up-to 3.9ft
Rent This MachineContact us for a free quote
A 21m truck mounted platform allows an operator to access a telecoms tower
White Blade Access logo

Performance

Max. working height 129ft (39.5m)

Horizontal outreach with 440lbs (200kg) 54.7ft (16.7m)

Horizontal outreach with 880lbs (400kg) 42.6ft (13m)

Up-and-over clearance max 72ft (22m)

Basket capacity 880lbs (400kg)

Basket rotation 180°

Turret rotation 450°

Turret rotation, one side narrow 120°

To be jacked up on ground slope of 16.7° / 30%

Height & Width track adjustment 50cm / 32cm

Gradeability max 16.7° / 30%

Slope angle 16.7° / 30%

Travel speed 1.6kph

Leo 40GTX Working Range

Image

Measurements

Platform height (a) 3.6ft (1.10m)

Platform length (b) 2.6ft (0.8m)

Platform width (c) 4.9ft (1.5m)

Length overall (d) 30.1ft (9.2m)

Length without basket (e) 27ft (8.2m)

Height, travel position (f) 6.5ft (1.98m)

Width, minimal overall width (g) 5.2ft (1.58m)

Ground clearance, max (h) 1.8ft (0.56m)

Length, outrigger footprint standard (i) 22.1ft(6.75m)

Width, outrigger footprint standard (j) 18.2ft (5.55m)

Length, footprint one side narrow (k) 29.5ft (9m)

Width, footprint one side narrow (l) 12.7ft (3.9m)

Outrigger plate (L x W) 1.7ft x 0.9ft (0.52m x 0.27)

Download Spec Sheet

Leo 40GTX Dimensions

Image
*Any information or images contained within this page are for guidance only and is subject to change without prior notice. Manufacturers can and do change the specification of equipment as part of their on-going development programmes. It is advised that the information on this page is accepted as indicative only and understood that Blade Platforms LLC can not be held liable for any damage, injury or consequential loss sustained through the use of this website to specify any equipment or services.