Leo 50GTX Atrium Lift With 163ft Working Height
The Leo 50GTX atrium lift has a minimum width of only 5.2ft, max outreach of 57ft & a max working height of 163ft giving unrivaled performance capabilities when combining indoor & outdoor use compared to other machines in this height range.
Unrivaled Control
The non marking track drive system protects flooring when used indoors & allows for precise maneuvering so the platform can be easily setup to give access to hard to reach areas.
Safe Positioning In Tight Areas
The multi-level, multi-position stabilizer system allows the machine to be set up on slopes, uneven terrain, stairways and in confined areas giving access where the height difference of the terrain is up-to 3.9ft
Rent This MachineContact us for a free quote
Performance
Max. working height 163ft (49.7m)
Horizontal outreach with 176lbs (80kg) 57ft (17.4m)
Horizontal outreach with 440lbs (200kg) 51.5ft (15.2m)
Horizontal outreach with 880lbs (400kg) 42.6ft (13m)
Basket capacity 880lbs (400kg)
Basket rotation 180°
Turret rotation 450°
Turret rotation one side narrow 120°
To be jacked up on ground slope of 16.7° / 30%
Height & Width track adjustment 50cm / 32cm
Gradeability max 16.7° / 30%
Slope angle 16.7° / 30%
Travel speed 1.6kph
Leo 50GTX Working Range
Measurements
Platform height (a) 3.6ft (1.10m)
Platform length (b) 2.6ft (0.8m)
Platform width (c) 4.9ft (1.5m)
Length without basket (d) 27.7ft (8.45m)
Length overall (e) 30.6ft (9.35m)
Height, travel position (f) 6.5ft (1.98m)
Width, minimal overall width (g) 5.2ft (1.58m)
Ground clearance, max (h) 1.9ft (0.58m)
track, L x W (i) 9.5ft x 1.3ft (3m x 0.4m)
Length, outrigger footprint standard (j) 25ft(7.6m)
Width, outrigger footprint standard (k) 18.5ft (5.65m)
Length, footprint one side narrow (l) 32.1ft (9.8m)
Width, footprint one side narrow (m) 13.7ft (4.2m)
Outrigger plate (L x W) 1.7ft x 0.88ft (0.52m x 0.27m)
Leo 50GTX Dimensions
*Any information or images contained within this page are for guidance only and is subject to change without prior notice. Manufacturers can and do change the specification of equipment as part of their on-going development programmes. It is advised that the information on this page is accepted as indicative only and understood that Blade Platforms LLC can not be held liable for any damage, injury or consequential loss sustained through the use of this website to specify any equipment or services.