TZX 550 Spider Platform With 55ft Working Height

TZX 550 Spider Platform has a minimum width of only 5.2ft, max outreach of 25ft & a max working height of 55ft giving unrivaled performance capabilities when combining indoor & outdoor use compared to other machines in this height range.

Unrivaled Control

The non marking track drive system protects flooring when used indoors & allows for precise maneuvering so the platform can be easily setup to give access to hard to reach areas.

Safe Positioning In Tight Areas

The multi-level, multi-position stabilizer system allows the machine to be set up on slopes, uneven terrain, stairways and in confined areas giving access where the height difference of the terrain is up-to 3.9ft
Rent This MachineContact us for a free quote
A 21m truck mounted platform allows an operator to access a telecoms tower
White Blade Access logo

Performance

Max. working height 55ft (17m)

Horizontal outreach with 176lbs (80kg) 25ft (7.8m)

Horizontal outreach with 440lbs (200kg) 23ft (7.2m)

Basket capacity 440lbs (200kg)

Basket rotation 180°

Turret rotation 360°

To be jacked up on ground slope of 18° / 31%

Height & Width track adjustment 22cm / 17cm

Gradeability max 18° / 31%

Slope angle 18° / 31%

Travel speed 1.2mph (2km/h)

TZX 550 Working Range

Image

Carrier Vehicle & Stowed Dimensions

Platform height (a) 3.6ft (1.10m)

Platform length (b) 4.6ft (1.40m)

Platform width (c) 2.4ft (0.80m)

Length overall (d) 14.8ft (4.51m)

Length without basket (e) 6.6ft (2.01m)

Height, travel position (f) 3.3ft (1.01m)

Width, minimal overall width (g) 0.9ft (0.27m)

Ground clearance, max (h) 6.2ft x 0.83ft (1.92m x 0.25m)

Length, outrigger footprint standard (i) 17.4ft(5.30m)

Width, outrigger footprint standard (j) 15.6ft (4.75m)

Length, footprint one side narrow (k) 21.8ft (6.64m)

Width, footprint one side narrow (l) 13ft (3.95m)

Width, footprint both side narrow (m) 9.8ft (2.99m)

Outrigger plate (L x W) 1.01ft x 0.72ft (0.31m x 0.22)

Download Spec Sheet

TZX 550 Dimensions

Image
*Any information or images contained within this page are for guidance only and is subject to change without prior notice. Manufacturers can and do change the specification of equipment as part of their on-going development programmes. It is advised that the information on this page is accepted as indicative only and understood that Blade Platforms LLC can not be held liable for any damage, injury or consequential loss sustained through the use of this website to specify any equipment or services.